Accessories

  • Heating Doormat

    View All Images

    Heating Doormat


    Please Note: The Heating Doormat is a stand alone item. It does NOT connect to Residential Stair Mats or Residential Walkway Mats.

     

    The HeatTrak® Heating Doormat is designed to prevent snow and ice accumulation where slips and falls happen most: outside the front door. The mat plugs into any standard 120V outlet generating heat to melt snow at a rate of 2" per hour. This durable doormat is designed to be left outside for the entire winter season and comes with its own ground fault circuit interrupter (GFCI). The doormat is charcoal gray and has a ribbed carpet surface providing your home with the look of a stylish high-end welcome mat.

     

    Product Specifications:

    Size: 24" x 36". Cord Length: 6 feet
    Size: 30" x 48". Cord Length: 6 feet


  • Thermostat & Snow Sensor Controller

    Click to Enlarge

    Thermostat & Snow Sensor Controller

    The DS-2B is a snow sensing controller that will turn the mat on whenever it senses moisture AND the temperature is below 38 degrees Fahrenheit. This controller must be hardwired into the circuit by a certified electrician. Each DS-2B can handle up to 30 amps on a 240V outlet or up to 15 amps on a 120V outlet.


  • Watertight Cable Extender - 20 Inches

    Click to Enlarge

    Watertight Cable Extender - 20 Inches

    The 20-Inch Watertight Cable Extender can be used with Residential Walkway Mats (HR20-60), Residential Stair Mats (HR10-30), and Industrial Stair Mats ("HRT" Series).  The cable extender is not compatible with Industrial Walkway Mats. Multiple cable extenders can be connected together to create custom length cables. The 20-Inch Cable Extender and 25-Foot Cable Extender can also be connected together.

     

    For Residential Walkway & Stair Mats:
    All HeatTrak Residential Mats connect with one another using their built-in watertight connectors. In some instances, you may need a 20-Inch Cable Extender to create longer cable connections between mats. Follow this rule:
    Starting from the Power Unit, wherever a Residential Stair Mat leads to a Residential Walkway Mat you will need a 20 Inch Cable Extender.

    Please see our Buying Guide for more information.

     

    For Industrial Stair Mats:
    All Industrial Stair Mats connect with one another using their built-in watertight connectors. When your industrial stairs are more than 6 inches apart from each other you will need to use the 20-inch cable extender to connect Industrial Stair Mats together.

     

    Product Specifications:
    Length of Cable Extender: 20 Inches
    Cable Gauge: 14/3 SJTW

     


  • Watertight Cable Extender - 25 Feet

    Click to Enlarge

    Watertight Cable Extender - 25 Feet

    The 25-Foot Watertight Cable Extender can be used with Residential Walkway Mats (HR20-60), Residential Stair Mats (HR10-30), and Industrial Stair Mats ("HRT" Series).  The cable extension is not compatible with Industrial Walkway Mats. Multiple cable extenders can be connected together to create custom length cables. The 25-Foot Cable Extender and 20-Inch Cable Extender can also be connected together.

     

    If the electrical outlet on your house or facility is further than 6' from the heated mats you will need to use an outdoor rated cable extender. This 25-Foot Watertight Cable Extender will provide an additional level of protection against water and moisture than other outdoor rated extension cords. This watertight cable extender was designed with the HeatTrak Walkway and Stair Mats in mind and will only work with HeatTrak products. To ensure a watertight seal, the cable extender has the same patented connectors as the heated walkway and stair mats. This cable extender can be used with Residential Walkway Mats (HR20-60), Residential Stair Mats (HR10-30), and Industrial Stair Mats ("HRT" Series).

     

    Product Specifications:
    Length of extension cable: 25'
    Cable Gauge: 14/3 SJTW

     


  • GFCI Power Unit

    Click to Enlarge

    GFCI Power Unit

    Each set of Residential Heating Mats requires one GFCI Power Unit to connect the system to an electrical outlet. The Power Unit contains a watertight connector that will allow it to connect to the first or last mat in your system. A single Power Unit powers up to 15 amps; That's either 5 Walkway Mats, 15 Stair Mats, or any combination thereof. The Power Unit contains its own Ground Fault Circuit Interrupter and a 6 foot cord.


    The GFCI Power Unit is rainproof, so it can be left outside for the entire winter season.


    Product Specifications:

    Power Unit Cord Length: 6 feet
    15A, 120V
    Trip level: 30mA


  • HR-Wireless - Wireless Switch; 15A, 120V

    Click to Enlarge

    HR-Wireless - Wireless Switch; 15A, 120V

    The 15 Amp Wireless Remote Control Outlet & Switch allows you to turn your mats on and off from inside your home or facility with just the click of a button. Red and green light indicators let you know when the mats are on or off. The 2-outlet design allows two mat systems to be plugged in at the same time. Rated for outdoor use. 100 ft range. 120V, 15 Amps


  • HR-Therm3550 - 10” Thermostat Extension Cable; 15A, 120V

    Click to Enlarge

    HR-Therm3550 - 10” Thermostat Extension Cable; 15A, 120V

    This thermostat will automatically turn on your mats when the temperature drops below 35 degrees (F).  The Thermostat Extension Cable is simple to use. Plug one end directly into any 120V outlet and the other end into your mat’s Power Unit.  The Thermostat Extension Cable has an LED indicator that illuminates when the thermostat is activated. It will remain activated until the ambient temperature rises above 50 degrees (F).